BLOG    CAREERS     LOGIN         
logo SenseAnywhere transparant

AiroSensor

Temperature range

Accurate temperature monitoring with both the logger and the Pt100

Realtime

24/7 data for a full audit and always secure access to your data via the Cloud

Secure data storage

Automatic registration of arrival and departure times

Instant alarms

Immediate notification by email, SMS or Voice when limits are exceeded

FIND RESELLER

with Pt100

airo-sensor-with-pt100

-200 °C to + 200 °C

The SenseAnywhere AiroSensor 20-20-43 is equipped with the SenseAnywhere Bus (SAB)  digital interface. The SAB is a hot-swap interface that provides data and communication for the Pt100 probe, when connected to the datalogger. SenseAnywhere’s Smart Probe is equipped with a Class A Pt100 element, providing accurate measurements over a wide temperature range from -200 ˚C to +200 ˚C making it a perfect solution for monitoring cryogenic applications and ULT freezers. 

Individual calibration

A great benefit of this Smart  Pt100 Probe is that you can calibrate it individually, separate from the AiroSensor base unit. This is a major advantage compared to analogue interfaces, where you would calibrate the data logger and the measuring device as a pair.

10 years

Battery lifetime

18.500 events

logging capacity

1.000.000

measurements

Applications

SenseAnywhere manufactures very accurate, easy to use and long-lasting data loggers, enabling fully automated temperature monitoring during storage or transport of temperature-sensitive products. Our monitoring and mapping solutions are being used in all kinds of industries, among which are Food, Pharma and Logistics, all over the world. Our data loggers have a 10-year battery life, which is unique in the industry.

Cold chain monitoring
  • PHARMA
Warehouse monitoring
  • MAPPING
Cold chain monitoring
  • FOOD
Laboratory monitoring
  • LABORATORY

10 YEARS

battery lifetime

= up to 1.000.000 measurements
Even with data transfer every 5 minutes

SenseAnywhere products are easy to install, use and maintain, essentially providing maintenance free usage for up to 10 years.
The location arrival and departure times are automatically logged. An integrated accelerometer is used to detect motion or shock and there is an option to monitor humidity. The AiroSensors can transmit wirelessly up to 600m (line of sight) to an AccessPoint and continue to collect data even when out of range. In addition to wireless temperature monitoring, SenseAnywhere can also offer calibration services and mapping solutions.

Easy to
install, use
and maintain
AiroSensor Cloud Temperature Monitoring dataloggers sensors wireless cold chain
Data security

Your data in a secure & validated environment

You can access your data and edit settings of your devices in the SenseAnywhere client portal. Our software is validated. We follow the rules of GxP, and we offer customers tools to become GxP compliant: our Validation package contains a Design Qualification (DQ), Manufacturer Software Validation (MSV), Installation Qualification (IQ) and Operational Qualification (OQ) Our software is constantly updated and extended with features. Our webportal enables you to:

  • Manage the settings of your Company account, Users and Devices
  • Set Alarms and document RCA & CAPA
  • Schedule and download reports
  • Review audit trails to see which users have performed which actions in the system and when.

Find a reseller

within our global network

Reseller map for Sense Anywhere
FIND RESELLER

Set up alarms in SAClient

How to set up alarms in SAClient?

  • You can setup alarms for each of your Sensors under Alarm > Profile. To set up a new alarm profile for your Sensor, click on the “Add New Alarm Profile” button at the bottom of the screen.
  • You’ll be guided to a screen where you can set up your alarm. Here, you can name the alarm, select from various Alarm Types, and choose the corresponding logger. You’ll also have the option to define specific parameter limits that trigger the alarm, opt for a delay or reminders.
  • Assign a specific user within your account to receive these notifications. The users assigned to this alarm can receive an alert via email, SMS or Voice based on their preference.
  • Select the “Save” button at the bottom of the screen once all these fields are complete.

Access your data in SAClient

How to access your data in SAClient?

  • Log in to the SAClient Portal. You get access to a Dashboard with real-time information on status of your devices. You can access data for your Sensors under the Overview section.
  • Detailed Data visualized in charts can be accessed under Overview > Data Analysis. Choose on the left hand sided drop-down menu the desired Sensor. You also can change the Period. Choose on the right sided drop-down menu the desired Data. Then Click “Go”.
  • Data can also be exported by pressing the “CSV” button on the bottom of the page.
  • To download an image of the chart, simply click the three lines on the right side and select your preferred export format.
  • Access your data in SAClient

How to register your 20-20-31?

How to register your 20-20-31?

  • To register the Sensor, remove it from its holder and locate the serial number on the back.
  • Register the device under Management > Register Device in SenseAnywhere Cloud with the serial number.
  • After successful registration, place the Sensor back in its holder. Your logger should now be online and visible in the system.

Register your sensor and Pt100

How to register your AiroSensor and Pt100 Probe?

  • The AiroSensor 20-20-43 and the Pt100 Probe can be registered in the SAClient Portal by navigating to Management > Register Device.
  • The AiroSensor 20-20-43 does not need to be removed from the holder. To register the AiroSensor, you will need the serial number which can be found on the box.
  • To register the Pt100 Probe, perform the same steps as you did for the AiroSensor. The serial number can be found on the bag or on the Probe itself. You only need one license to register the logger. The registration of the Module is free.
  • Once registered, they will appear in your list of devices on your home page dashboard.
  • After registering the Pt100 Probe, the settings and name can be changed under Management > Sensor. Select the pencil icon, then edit and click “Save”.

INSTALL YOUR ACCESPOINT

Find the right location to install your AccessPoint, keeping the following in mind. The AccessPoint uses radio signals to communicate with the Sensors wirelessly.

To get the best possible reception:

  • Place the AccessPoint as close as possible to the location of the loggers.
  • If the area that needs to be covered is large, place multiple AccessPoints at different locations in the building/at the site.
  • Mount the AccessPoint in a vertical position. There is a keyhole on the back that can be used to hinge the AccessPoint on a screw.
  • If the location allows it, hang the AccessPoint in free air suspended by its cables.
  • See the AccessPoint as an antenna; actually, the antenna is integrated into the AccessPoint.
  • Do not mount the AccessPoint close to or on a metal surface.
  • Try to avoid mounting the AccessPoint on concrete walls.
  • Try to avoid concrete walls or floors between the AccessPoint and the loggers.
  • Try to avoid mounting the AccessPoint on thick wooden beams.
  • Try to avoid metal walls or surfaces between the AccessPoint and the loggers. Also, modern windowpanes with sunscreen protection (a thin metal film) obstruct wireless signals significantly.

Troubleshooting Tip:
If the LED on the AccessPoint does not turn green, you do not have an Internet connection at this moment, or your firewall is blocking outgoing TCP/IP connections on port 80. If you have internet access but the AccessPoint does not turn green, you should add the Ethernet MAC address range of the SenseAnywhere AccessPoints (00:21:5B:00:00:00) to (00:21:5B:FF:FF:FF) to the “allow table” in your firewall for outgoing communication. The AccessPoints use only TCP/IP communication over port 80. It is not necessary to open any incoming ports in your firewall.

Power over Ethernet (PoE)
Would you like to power your AccessPoint via Ethernet cable? Get a Power-over-Ethernet (PoE) cable set from your SenseAnywhere reseller. This kit merges power from the adapter and switch, delivering both via a standard Ethernet cable. Choose between passive (white) and active (black) sets based on your switch type:

  • Passive PoE (White Set): Merge power from the adapter and data from the switch using the combiner at the switch location. Split them at the AccessPoint using the splitter.
  • Active PoE (Black Set): If you have a PoE-enabled switch, it provides both power and data. Simply split them using the black active PoE splitter before reaching the AccessPoint.

REGISTER YOUR ACCESPOINT

How to register your AccessPoint?

  • In the SAClient Portal, under Management > Register Device, you can register various devices, such as AccessPoints, AiroSensors, Modules, and AssetTags. To register your AccessPoint, you will need the serial number located on the back of the device.
  • Once registered, the AccessPoint will appear in your list of devices on your home page dashboard.
  • Under Management > Location, you have the option to add a location. To edit the name and location of the AccessPoint, go to Management > AccessPoint, select the pencil icon, edit and click “Save”.

HOW IT WORKS

Welcome and thank you for your trust in SenseAnywhere!

Your package includes several items:

  • A welcome card with all the information you need to get started and a Pin code to create your account with Credits.
  • The Pt100 Probe for measuring ultra-low or high temperatures. The serial number can be found on the bag or on the Probe itself.
  • The required cables and adapter for connecting the AccessPoint.
  • The AssetTag for easy swapping of AiroSensors, without losing data.
  • The AiroSensor 20-20-43 that can be connected to different Modules.
  • And finally, the AccessPoint to connect the Sensors to SenseAnywhere’s Cloud Service. The serial number can be found on the back.

For instructions on creating your account and adding Credits, please refer to the welcome card or visit www.saclient.com/redeem.